ze's sandcastle

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Why we do it ======

Trying to get a platform with firewall, loadbalancing, and many
connections, we ended up not taking any appliance, but getting nice
hardware with heavy processors and nice network cards.

It's actually cheaper to get 8 servers with dual 10Gbps interfaces, 4
10Gbps switches than it would be to get like 2 appliance load-balancers
that could possibly handle 4Gbps total traffic.

More redundancy, probably higher limits, and more flexibility... and all
that cheaper ? Yeah, nice. But what are the limits you can reach with
those ?

Lets bench it !

====== What we want ======

At the end, we want :

  * firewall/gateway with multiple vlans, and alot of failover IPs
  * loadbalancers with hundreds of IPs
  * client that connects to servers through fw/gw and lb

Lets check what are the limits we can reach, and how it reacts.

====== Basic setup ======

Some informations about the hardware used for our benches :

===== Servers =====

^ cpu | 2 Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (two 6 cores, total of 24 threads) |
^ memory | 64GB (memory is cheap) |
^ network | Intel X520-DA2 -- Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) |

===== Connectivity =====

^ Switches | TurboIron x24 |
^ Cables | Twinax cables (no reason to get fiber when your servers are so close from the switches) |

===== Operating System =====

Linux - Debian/wheezy (some hardware are not supported ot squeeze install)

===== Monitoring =====

We are using Munin, with 1s statistic plugins, including :

  * CPU
    * per cpu usage
  * Network bandwidth
    * bps
    * pkt/s
  * tcp (netstat -s, TCP part)
    * established connections (current)
    * new inboud tcp connections
    * new outbound tcp connections
  * sockets (/proc/net/sockstat)
    * orphan
    * timewait
    * alloc
    * memory

===== Softwares =====

==== Client ====

inject (found [[http://1wt.eu/tools/inject/|here]])

As we try to handle alot of connections from a single server, we soon
hit the source port limit. inject allows to bypass that limit, as it
binds to a specific source ip/port for each outgoing connections.

==== Server ====

Nginx, as in production we will have reverse proxies using nginx.

Some issues with nginx, forced me to search for an other server to bench. [[http://1wt.eu/tools/httpterm/|httpterm]] was pointed out. Like inject, it is aimed to just do that: stress some http connections.

==== firewall ====

As we are running linux, it's obviously iptables.

==== Loadbalancing ====

As mentionned earlier, it's IPVS with direct routing (already used in
our production).
ze's sandcastle

User Tools

Site Tools

Page Tools
